Double Glazing Door Locks
Many homeowners choose double-glazed windows and doors to increase insulation as well as energy efficiency and noise reduction. However, they can also be an effective deterrent against burglars.
To ensure the security of your double-glazed windows, check that they have been fitted with anti-jemmy hinges. These special hardware components make it extremely difficult to open the window sashes off.
Multi-point locking
Multipoint door locks are one of the most effective security tools you can install at your home or office. They are almost impossible to pick or break, and are a great addition to any security system. They also can improve your energy efficiency by cutting down on drafts in the doorframe and improving the seal.
Multi-point locking systems are composed of a deadbolt, live bolt and hook bolts that are above and below the latch. They also include flush bolts that lock into the door's head and the sill. They usually extend across the entire width of the door if not more. In commercial contexts, these are referred to as "full-width" systems because they are able to secure the entire opening.
The majority of uPVC doors have multi-point locking. However, certain timber doors are offered with this level of security. This type of lock offers greater security when compared to conventional locks. It is often described as a part of the Secured by Design initiative, which has been endorsed by the police.
When a multi-point uPVC lock door is shut and the outside handle is turned on, it activates the latch bolt. The inside handle is locked by turning the lock's thumbturn on the inside with the door handle raised or by using keys. Always make use of a key when you lock your door. Utilizing an outside handle to lock the door could cause damage to the latch or deadbolt.
If your uPVC multi-point lock doesn't function properly, it could be because it's not aligned with the door frame. You can check this by placing a spirit level on the top of the door and looking for gaps in the miter joints at the point where the frame is joined to the door.
If you notice an opening it's worth contacting your double glazing expert to have a look and resolve the issue. They'll be able to replace the lock on your behalf or fit a replacement. They'll be able to tell if the problem is due to damage to the frame or the lock unit itself. In such cases, the technician will be able to repair or replace the multipoint lock to make it work again.
Espagnolette locks
Espagnolette locks are now a standard locking mechanism for double-glazed uPVC windows. The shape of the flat strip that changes when you turn the handle is a good method to identify them. They work in tandem with secure multi-point locks placed around the frame to lock and release your windows. If you are seeking to upgrade your uPVC windows, espagnolette handles are an ideal option for either new builds or renovations. They are available in a range of styles, both contemporary and period, and come in a range of bar lengths, backset options, and mushroom cam heights with a variety of profile keeps to suit all kinds of applications.
While they are a popular choice the espagnolette locks have been criticized as providing low levels of security to French doors. A single locking point in the middle of the door is easily bypassed. It is also possible for thieves to open French doors by pushing the handle to the right or left. These doors are typically the main entry points into your home, and they should be secured to limit the risk of unwanted intrusion.
Although they are referred to as espagnolette locks, these locks aren't bolts they are actually a one-piece mechanism that is able to be fitted externally on the outside of your French doors or internally on the frame of a casement window. The mechanism is operated via a handle and comprises of a rod that has hooks at the head and sill that fit into sockets in the window frame. When the handle is operated, the rod is moved upwards and downwards, and the hooks are locked into their receivers, allowing them to lock and unlock your windows.
They are a great option for those who wish to enhance the security of French doors without compromising the appearance of the door. These handles can be used in various styles and can be master-keyed for added security.
Like cockspur handles espagnolette handles are available in both crank and inline models, based on the orientation of your windows. Inline versions simply turn exactly the same way as the original, whereas the cranked versions are available in both left and right handed versions.
Laminated glass
Laminated glass is typically used for windows as it is extremely difficult to break. It is also much safer than regular glass since it is fused into a single piece of safety glass rather than breaking into sharp, loose shreds. This makes it ideal for both residential and commercial properties.
Lamination is the process of combining two pieces flat glass and an interlayer of plastic. The entire piece is heated and put under pressure to make it stronger enough to be used as a window or door. The laminated glass that is created is up to 5 times stronger and 100 times stronger than tempered glass. It also withstands greater impacts and is resistant to weathering.
This type of glass is perfect for buildings that need to perform well, such as enhanced safety (impact-resistant glass), UV protection, or noise reduction. window door repairs locks glass hinges can be combined with high-performance coatings to improve the thermal insulation as well as solar control. It is available in a variety of options to fit your budget and project.
Unlike tempered glass, laminated glass is able to be cut after production, and be safe to use. It is more likely to not shatter if cut from the side instead of the edge the glass. This makes it a good choice for glass that cannot open or close, like cellar windows.
It is also used in high-rise buildings in urban areas because of its ability to reduce the amount of noise that travels from the street to the interior of the. The Saflex PVB interlayer in the laminated glass also helps to suffocate some of the sun's harmful UV rays, which prevents discoloration of furnishings and fabrics.
Although laminated glass is typically more expensive than glass that has been tempered, it comes with numerous advantages that could save you money over the long term. It's also more robust, resistant to abrasion and scratches and can be customized to your exact specifications. Additionally, it's less prone to heat damage and is an ideal choice for high-rise and coastal areas. Some building codes even require that exterior doors and some interior windows are made of glass laminated.
Friction hinges
Friction hinges are designed to hold and support the position of doors, flaps, panels, and windows. They also impede the movement of other hinges, and also prevent the slamming of a heavy object or accidental closing and opening. They are available in different sizes and shapes. They can have different torques that are the forces which determine how long the hinges will stay open or closed.
Aluminum is an excellent material for friction hinges because of its strength-to-weight ratio that is high, durability, and resistance to corrosion. It is also light and easy to work with. It can also be crafted into a wide variety of finishes and is easy to set up and repair. Brass is a different material that is widely used for friction hinges. Brass is an alloy comprised of copper and zinc. It is naturally resistance to corrosion. It is stronger and more durable than stainless steel, however it is more expensive.
The hinges that use friction in uPVC door systems that have double glazing are able to be customized depending on the purpose for which they are intended. These customizations may include the amount of damping, the viscosity of the lubricant and the amount of tolerance for space between components, and the environmental conditions where the hinge is used. These variables can affect the dynamic torque of the hinge, and it is essential to keep track of this metric in critical applications.
There are a variety of friction hinges, such as one-way and detent. Detent friction hinges do not have torque in the opposite direction. Other variations include curl, disc, and pipe friction. Every type of friction hinge is distinct and has its own set properties that make it more or lesser useful for specific applications.
Friction hinges are also referred to as 'free-stop' hinges since they permit a door or lid to remain at an angle after the force has been removed. This helps to prevent injuries due to accidental closures. This type hinge is ideal for medical, rugged or hazardous locations. The hinges are configurable to allow for different degrees of free play, and can be designed to work at a variety of angles.